Doremi ShowVault / IMB - Manual (Page 19)

CRT.OM.001420.DRM Page 19 Version1.6
Doremi Labs
5 IMB Marriage Procedure
5.1 Performing the Marriage on Christie Series-2 Projectors

When the IMB has been replaced, or upon first installation the following error will be
displayed on the projector touch panel (Figure 18).
Figure 18: Marriage Error Window

Before beginning the marriage, stop playback. Eject the SPL and close all windows and
programs on the ShowVault.

In order to perform the marriage, the projector needs to be powered on (touch and hold
the area of the touch panel labeled "ON").

The ShowVault and IMB need to be connected and powered on.

The lamp should be turned off (touch and hold the left icon if necessary).

Verify that the PCIe and Ethernet cables are connected.

The home screen on the touch panel will show the following - see (note that the marriage
status and critical alarm is red):