DekTec DTM-3237 DVB-S2 Receiver User Manual
Page 32
DTM-3237 – OEM DVB-S2 Receiver with DVB-ASI Output
User Manual
32
In this case the DTM-3237 is configured as COM port number 3.
B.2.4 Debugger
Dtm3237Util is a GUI tool to view status, control settings and upload firmware to the DTM-3237. This
utility can be found on the DekTec USB flash drive. It can also be downloaded from the DekTec
website. Dtm3237Util is an executable that can be run from any directory on your PC.
When started, the debugger enumerates serial ports and lets the user select the serial port to which
the DTM-3237 is connected. When a valid serial port is selected, all registers are read from the
DTM-3237 and shown in the GUI. Blue fields can be edited. These fields are written to the DTM-3237
when the pen symbol to the right of the edit fields is clicked. Yellow fields are read only; they are read
when the refresh arrow is clicked.