DekTec DTM-3237 DVB-S2 Receiver - Manual (Page 13)

DTM-3237 – OEM DVB-S2 Receiver with DVB-ASI Output
User Manual
13
3.4.6 Stream status LED
The status LED indicates the status of the DVB-S(2) receiver and the ASI output stream. The following
colors are used for status indication:
Continuous green Valid DVB-S(2) signal detected and
generating signal on DVB-ASI output
Short green flashes No DVB-S(2) signal detected and no
output generated on DVB-ASI output
Short red/green flashes The DTM-3237 is in firmware upgrade
mode. This modes allows:
1) Upgrading the firmware and go back to
normal operation afterwards
2) Go to normal operation (in case valid
firmware is present)
Red flashes Internal device error.
If resetting the device does not help,
contact DekTec support.