2 device properties – DekTec DTM-3237 DVB-S2 Receiver User Manual
Page 19

DTM-3237 – OEM DVB-S2 Receiver with DVB-ASI Output
User Manual
19
4.5.2 Device properties
Manageable Items – Category 0x01 – Device properties
Nr
Variable
Description
Access
Type
0x00 All
All settings in this category
RO
29 bytes
0x01 FPGA version
Version number of the FPGA code on-
board of the DTM-3237
RO
uint8
0x03 Firmware version Firmware version: the major version is
encoded in the tens, the minor version
in the units, e.g. ’10’ indicates v1.0
RO
uint32
0x04 Serial number
Unique serial number for this device,
e.g. 3237.000.010
RO
uint32
0x05 Type
Device type number, e.g. 3237
RO
uint32
0x06 Hardware revision Hardware revision number,
e.g. 302 = 3.2
RO
uint32
0x07 Bootloader
version
Bootloader version number
RO
uint8
0x08 Production date
Production date of this board
Bit 31..8: Year
Bit 7..0: Month
RO
uint32
0x09 I
2
C address
7-bit I
2
C address
Limitations:
- Bit 0 (I
2
C R/W bit) can't be set
- Address range 0x08 to 0x76
Changes to the I
2
C address are
automatically persisted in flash
memory.
Default: 0x60
R/Wusb
uint8
0x0A LVTTL serial
control port baud
rate
Serial baud rate
Valid values: 9600, 115200 and
256000
Changes to the baud rate are
automatically persisted in flash
memory.
Default: 9600
R/Wusb
uint32
0x0B Subtype
Device subtype, e.g.0=none, 1=A, ...
RO
uint8
0x0C Busy
Device busy flag
0 = Ready
1 = Processing “DE” marked items
RO
uint8