Datapath VisionSwitch-32 - Manual (Page 8)

8
Using The VisionSwitch Application
A simple application program is provided with the VisionSwitch32-SA allowing the crosspoint switch
to be controlled manually.
To open VisionSwitch, select the icon located in the Start menu group:
Start|Program|VisionSwitch that was created during installation, once selected the application
window is displayed.
The VisionSwitch application window displays a list of available Outputs and Inputs. Using the
up/down arrows, you can select which input you want to set against a specific output.
Once a selection has been made and a configuration set up, checking the On box immediately
initialises that particular Output setting.