Software installation visionswitch32-sa, From the datapath cd, From the datapath web site – Datapath VisionSwitch-32 User Manual
Page 7: From the datapath cd from the datapath web site
7
Software Installation VisionSwitch32-SA
The VisionSwitch32-SA drivers and software application for Windows® 2000, Windows® Server
2003 and Windows® XP can be installed on your system using one of the following methods:
• The Datapath Software CD supplied with the VisionSwitch32-SA card.
• The Datapath Web Site.
Before you commence software installation, ensure that you login with administrator rights.
From the Datapath CD
Insert the Datapath Software CD into your CD ROM drive, follow the Installation Wizard instructions
as prompted.
From the Datapath Web Site
Locate the latest version of VisionSwitch stand alone drivers and application at
click on the vsnswtch.zip link :
When download is complete select the Save this file to disk option and click OK and follow the
download instructions.
Once the download is complete, unzip the file, locate and double click on the
file and
the installation process will commence.
Follow the Installation Wizard instructions as prompted.
Note:
When the application installs on Windows® 2000, the New Hardware Wizard will run.
Dismiss the Hardware Wizard and continue with the setup as above.
Once the installation is complete, reboot the system.