Datapath VQS-01 - Manual (Page 9)

9 24/02/2011
Sync Sockets
The Sync sockets are used when multiple VQS- 01’s are connected together and it is required
that all displays be locked. For most applications this is not necessary therefore connecting
Sync in and out sockets is not normally required. For applications that do require all displays
to be locked the following connections should be made:

The first VQS-01 (Sync Out) conntects to the second VQS-01 (Sync In).

The Second VQS-01 (Sync Out) connects to the third VQS-01 (Sync In) and so on.
Warning! The equipment can be damaged if the Sync sockets are not connected as
described above.
Input Sockets
The Input socket is used to connect the input source to the VQS-01.
Power Sockets
The Power In socket is where the power source is connected to the VQS-01. The VQS-PSU
supplied with the VQS-01 is plugged into the Power In socket. The Power Out socket can
be used if you possess a more powerful Power Supply Unit (PSU) which can link to multiple
VQS-01 controllers. Datapath do not supply such power supply units.
Power and Ready LED’s
The Power and Ready LED’s indicate phases of operation, details of which are highlighted
later in the manual.