Datapath VQS-01 - Manual (Page 8)

8 24/02/2011
Description
Front Panel
The front panel is made up of 3 specific areas:

The LED panel.

The Adjustment Buttons.

Output Sockets
LED’s
The LED’s are marked A - H and are used to identify various operations of the VQS-01. The
LED panel is covered in more detail later.
Adjustment Buttons
Adjustment operations can be made using the four buttons marked Select, -, +, and Save,
again these are covered in more detail later.
Output Sockets
The output sockets are used to connect the VQS-01 to your four display monitors.
Rear Panel
The rear panel is made up of four specific areas:

Sync sockets.

Input sockets

Power sockets
 Power LED’s