Datapath VQS-01 - Manual (Page 16)

16 24/02/2011
70Hz
72Hz
75Hz
85Hz
Flip Image Output
The Flip Image Output option enables the user to display the image as a flipped image i.e.
upside down.
To operate the Flip Image Output mode:

Use the Select button and navigate through the settings until the “A” or “D” LED
(depending on if yo u have analog or digital monitors connected) is lit, the “C” LED is
lit but the “B” LED is not lit.

Continue to press the Select button until the required Output has been located. The
table below illustrates which LED’s should be displayed for which output.

Use the + and - buttons to flip the image.
Note:
For illustration purposes the LED panel in the table is indicating that a DVI source is
connected i.e. the “D” LED is on. If a VGA source is connected the “A” LED would be
illuminated:
Selecting this series of LED’s and
using the + and - buttons will flip the
image displayed in the top left
screen (Output 1)