Dual 16-3267 - Manual (Page 22)

22
Angle selection
Some DVD discs contain scenes which have been shot
simultaneously from a number of different angles. For
these discs, the same scenes can viewed from each of
the different angles. (The recorded angles differ from
disc to disc).
1. Set the angle function to ON by pressing ANGLE
on the remote control during playback.
2. As scenes recorded with multiple angles begin to
play, the angle icon : will appear on the television
screen.
3. Press ANGLE repeatedly to view the scene from dif-
ferent angles.
For example: 1/4, 2/4, 3/4, 4/4.
Picture zoom
The zoom function allows you to enlarge the picture
on the television screen and to pan through the enlarged
image.
1. Press ZOOM on the remote control unit repeatedly
to select the following magnification factors:
ZOOM x 1.5
ZOOM x 2
ZOOM x 3
ZOOM OFF
2. Press /// to pan through the enlarged image
Notes
• This function is only available during playback.
• This function is not available when playing CD or
MP3 discs.
• This setting will be cancelled automatically when
the disc tray is opened or the power is turned off.
Selecting the subtitle language
This function is available for DVD discs recorded with
subtitles in multiple languages. To display the current
language selection press SUBTITLE once during
playback. Continue pressing to select other subtitle
languages. Press ENTER to continue playback with
the desired subtitle language.
Notes
• Some DVD discs are recorded with subtitles that
cannot be turned off.
• Subtitles may not appear immediately after you have
turned them on.
• Some DVD discs allow you to change subtitle
selections only via the disc menu. Use the //
/ buttons to select the desired language or turn
the subtitles ON or OFF and then press ENTER .
• Use the SETUP menu to select a preferred subtitle
language.
• The maximum number of subtitle languages
stipulated by the manufacturer is 32.
Special Function Special Function Special Function Special Function Special Function
Notes
• The angle icon
: will disapear imediately when
you press ANGLE on the remote control, or after
five seconds.
• This function is only available when the disc has
been recorded with scenes shot from more than one
angle.
• If after pressing ANGLE , the inhibit icon is
displayed on the television screen, this indicates
that the angle function is not available for the disc.