Special functions, Setting the sleep timer, Activating progressive/interlace mode – Dual 16-3267 User Manual

Page 21

The progressive-scan display presents 60 complete
frames per second, rather than the 30 frames per sec-
ond of interlaced scanning (ordinary normal TV sys-
tem). With nearly double the numbers of line, progres-
sive scan offers higher picture resolution and eliminates
bothersome motion artifacts those jagged edges on
moving objects.

To enjoy the full quality potential offered by pro-
gressive scan feature, a progressive scan TV
equipped with 480p input is required.

1. Connecting COMPONENT VIDEO OUT
-

Use the Pr/Cr Pb/Cb Y (red / blue / green) cables,
to connect Pr/Cr Pb/Cb Y jacks to the correspond-
ing 480p video input jacks or cables as CR/CB/Y or
YUV on a TV.

2. Activating progressive scan
-

Access to setup menu, set video out to YUV (Please
refer to PAGE 11

“ VIDEO output setting ” for de-

tails.)

In the stop mode , press P/I and ENTER to switch
PROGRESSIVE mode.

3. Deactivating progressive scan
-

Using the SETUP menu, set video out to S-VIDEO
(Please refer to PAGE 11

“ VIDEO output setting ”

for details.)

In the stop mode , press P/I and ENTER to switch
PROGRESSIVE scan mode back to INTERLACE
mode.

Notes
• Complete these steps within a 5 second period to

switch modes.

• When the switch is successful, the relevant mes-

sage will be displayed on the televison screen.

• For some TV modes, may cause blank TV screen,

when progressive scan switch off. In such case,
unplug the CR/CB/Y connection.

Setting the sleep timer

Use this function to program the system to turn off
automatically after a specified amount of time. Press
SLEEP repeatedly, to select the following time
intervals in minutes:

120

OFF

- When you have selected the specified time, the

“ SLEEP ” indicator lights on the television screen
and front panel display.

- To reset the time, press SLEEP again to make

another selection.

- To check the remaining time before the system turns

off, press SLEEP. The remaining time will be
displayed on the television screen and front panel
for a few seconds.

- To cancel the sleep function, press SLEEP until it

reaches OFF.

Special Functions

Activating PROGRESSIVE/INTERLACE mode

SUBW.

AUDIO OUT

DIGITAL OUT

OPTICAL

S-VIDEO

VIDEO

VIDEO OUT

Pr/Cr

Pb/Cb

COAXIAL

COMPONENT

VIDEO OUT

Pr/Cr

Pb/ Cb

D V D A UD IO O N LY

DOLBY/DTS