Dual 16-3267 - Manual (Page 10)

10
You must connect a TV to the DVD system in order to
use the DVD player. You can connect other audio and
audio / visual components to the DVD system in order
to use the Home Cinema Audio system’s surround
sound capabilities.
Connections Connections Connections Connections Connections
Connecting to TV and Additional Components
CO
A
X
IA
L I
N
OR
OR
OR
O
P
TIC
A
L I
N
C
FR FL
SUBW.
SR SL
L
R
AUDIO OUT
DIGITAL OUT
OPTICAL
S-VIDEO VIDEO
VIDEO OUT
P r/C r Pb/Cb Y
COAXIAL
AUDIO IN
COMPONENT
VIDEO OUT
S-VIDEO IN VIDEO IN
Pr/Cr
Pb/Cb
Y
DVD AUDIO OUT ONLY
DOLBY/DTS
TO RECEIVER 5.1 CH INPUT
Important!
- There are various ways to connect the system
to a TV (as shown in the illustration). You only
need to make one of these connections.
- Always refer to the instruction manual of the
connected equipment to make an optical con-
nection.
Connecting to TV
1 Use the supplied audio cables to connect AUDIO
OUT jacks to the corresponding AUDIO IN jacks on
the TV or other audio/visual components.
2 Use Pr/Cr Pb/Cb Y cables (not supplied) to con-
nect Pr/Cr Pb/Cb Y jacks to the corresponding
video input jacks on a TV.
If your TV is not equipped with Pr/Cr Pb/Cb Y video
input jacks, you can select one of the following al-
ternative connections:
Option 1
Connect the S-VIDEO OUT jack to the S-Video in-
put jack on the TV using a S-Video cable (not sup-
plied).
Option 2
Connect the VIDEO OUT jack to the video input
jack on the TV using a video cable (supplied).
Option 3
If your TV does not have inputs for Pr/Cr Pb/Cb Y,
S-VIDEO, or yellow Video jack, use an RF modula-
tor (not supplied) to connect to your TV.
Connecting to Audio Component
Use OPTICAL or COAXIAL jacks
- To enjoy 5.1 channel surround sound, connect to
an amplifier with DTS or Dolby Digital decoder, or,
CD audio recorder. DVD system ’ s digital audio out-
put should be set to “ SPDIF/RAW ” (default).
Use DVD AUDIO OUTPUT jacks
- To enjoy 5.1 channel DVD Audio sound, you will
need to connect DVD AUDIO OUT to your analog
5.1 channel inputs
on your receiver . To do this, you
will need 3 sets of L/R audio cables (not supplied)
Note
• In addition to 3 L/R audio cables for DVD audio, you
will need either the digital-coaxial cable or the digi-
tal-optical cable to enjoy 5.1 channel Dolby Digital
or DTS sound
from your DVD video discs.
Use AUDIO OUT jacks
- For connecting to amplifier, audio system or TV
with analog audio inputs only.