Basic setup – Dual 16-3267 User Manual

Page 12

Downmix

Select the DOWNMIX for LT/RT,STEREO, or OFF.
The default setting is OFF.

LT/RT (left total / right total): A two-channel delivery for-

mat for Dolby surround four channels (audio left,
center, right and surround) are matrix encoded
two channels. The terms refer to a Dolby sur-
round compatible downmix.

STEREO: All sound is reproduced and played through

the front left and right speakers. This enables
standard stereo reproduction.

Note
• Only with DVD door open or no disc in loader, you

can access Downmix menu .

Test tone

est tone

The test tone mode is used after you have connected
your speakers to check the balance level and
connections of each speaker.

Without putting any disc in the loader using the SETUP
menu, select SPEAKER SETUP to turn this function
ON. The test signal, a two second pink sound, will be
generated through the left, center, right, surround
speakers, and subwoofer individually. The location of
the speaker will be displayed on the television screen
and the front display panel, as each speaker is being
tested.

The default setting is OFF.

Note
• When using test tone, downmix should set to off.

Downmix

Use the SETUP menu, select SPEAKER SETUP to
set one of the following DOWNMIX settings:

--- SPEAKR SETUP PAGE ---

DOWNMIX

LT/RT

TEST TONE

STEREO
OFF

MAIN PAGE

SET DOWNMIX MODE

Setting the TV TYPE

To select the color system compatable with the con-
nected television set, use the SETUP menu, select
GENERAL SETUP to access the following settings:

MULTI SYSTEM: Select this mode when the connected

television that uses a multi-system mode. The
output format will adjust to the video signal of
each disc.

NTSC: If the connected TV uses NTSC system, se-

lect this mode. It will change the video signal of
a PAL disc to output in NTSC format (used in
the USA, Canada and Japan).

PAL: If the connected TV uses a PAL system, select

this mode. It will change the video signal of a
NTSC disc to output in the PAL format (used in
Western Europe)

The default setting is NTSC.

Selecting the on screen display (OSD)

language

This setting is used to establish the language that will
be displayed for all operations and on-screen
messages.

To change this setting, using the SETUP menu,
GENERAL setup screen, to access the OSD LANG
menu. Select one of the five available languages:
ENGLISH, FRENCH, GERMAN, ITALIAN or SPANISH.

SPEAKER SETUP

Basic Setup

General setup

SPEAKER SETUP