Dataman S6 - Manual (Page 11)

Dataman-S6 – MultiControl User's Manual
3-1-7 Status Bar
This will show the path of the currently loaded project file.
3-2 Project List
This view displays the currently loaded project files (*.lpprj) and supports up to 20 projects. Newly
added project files will appear at the top of the list and it will remove the last one when over 20
project files are loaded, the project reference is removed from the list but the actual project file is
not deleted
[Add]：Add one or more project files to the project list.
[Delete]：Remove a project file from the list, does not remove the actual file.
[Load]：Loads the selected project file. After successfully loading a project the project file
path is shown in the [Status Bar] and detailed information is shown in the [Information]
column. Allows the selection of an IC by full or partial part name.
8