d&b Z5409 Horizontal bracket 10S 12S - Manual (Page 4)

1.1. Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
Qty. d&b Code Description
1
Z5409 d&b Horizontal bracket 10S [1a]
1 Z5411 d&b Horizontal bracket 12S [1b]
Each including:
4 Hex head bolt M10 x 25 [2]
4 Spring washer [3]
4 U washer [4]
2 Spax screw [5]
1 D2960 Mounting instructions
1.2. Safety precautions
General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case you have any doubt as to the proper
functioning and safety of the items, do not use them.
Load safety information
The maximum permitted working load of the Z5409 Horizontal
bracket 10S is 13 kg (29 lb) (according to BGV C1) which
corresponds to the weight of one 10S or 10S-D loudspeaker,
respectively.
The maximum permitted working load of the Z5411Horizontal
bracket 12S is 17 kg (37 lb) (according to BGV C1) which
corresponds to the weight of one 12S or 12S-D loudspeaker,
respectively.
1.3. Intended use
The d&b Z5409/Z5411 Horizontal bracket 10S/12S must only
be used in conjunction with the d&b xS-Series loudspeakers 10S/
10S-D (Z5409) and 12S/12S-D (Z5411) as described in these
mounting instructions.
Fig. 1: Scope of supply
Fig. 2: Z5409/Z5411 Rigging examples
1. Z5409/11 Horizontal bracket 10S/12S
d&b Z5409/11 Horizontal bracket 10S/12S, Mounting instructions (1.2 EN) 4