d&b Z5402 Wall mount - Manual (Page 4)

1.1. Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
Qty. d&b Code Description
1
Z5402 d&b Wall mount M [1] (a)
1 Z5403 d&bWall mount L [1] (b)
Each including:
2 Hex head bolt M8 x 20 [2]
2 Spring washer [3]
1 D2957 Mounting instructions
1.2. Safety precautions
General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case you have any doubt as to the proper
functioning and safety of the items, do not use them.
Load safety information
The maximum permitted working load of the Z5402 Wall mount M
and Z5403 Wall mount L is 17 kg (37 lb) (according to BGV C1)
which implies the weight of one 8S/10S/10S-D/12S or 12S-D
cabinet.
1.3. Intended use
The d&b Z5402 Wall mount M and Z5403 Wall mount L must
only be used in conjunction with the d&b xS-Series loudspeakers
8S, 10S/10S-D and 12S/12S-D as described in these mounting
instructions.
The wall mounts allow both horizontal or vertical mounting of the
cabinets as well as vertical and horizontal alignment.
Fig. 1: Scope of supply
1. Z5402/Z5403 Wall mount M/L
d&b Z5402/Z5403 Wall mount M/L, Mounting instructions (1.3 EN) 4