d&b D6 Hardware - Manual (Page 13)

4.3. Loudspeaker output connectors - OUT A/B
WARNING!
Potential risk of electric shock.
The amplifier's output pins can carry dangerous voltages.
- Only use isolated loudspeaker cables with correctly fitted
connectors.
- Never connect an amplifier output pin to any other input or
output connector pin or protective earth (ground).
AMP A OUT A INPUT A
AMP B OUT B INPUT B
Fig. 6: NL4 Loudspeaker output
connectors and channel assignment
The D6 amplifier is supplied with NL4 output connectors [13]. Pins
1+/2+ and 1
— /2— are wired in parallel and carry signal.
Pin equivalents of the amplifier's output connectors and the type of
loudspeaker cabinets are listed in the table below.
D6 Output NL4 Speaker type NL4
+ 1 + / 2 + TOP + 1 +
— 1 — / 2 — TOP — 1 —
Tab. 2: D6 pin assignment SUB + 2 +
SUB — 2 —
Tab. 3: Pin assignment
loudspeaker
D6 Amplifier, Hardware manual (1.9 EN) Page 13 of 24