CUE relayCUE-8 User Manual
Page 6
Note several important points:
•
the process of displaying/changing Address and Bank using ACT button has no
influence on current relay status.
•
while the ACT button is pressed, inputs 1- 8 remain inactive.
•
if you set manually the Address and the Bank on the unit which is working in the
system where currently running project has a relayCUE-8 with its specific UnitID used
in it, then after next Init (i.e. controller reset) the manually set parameters will be lost!
The system in each its Init is renewing all parameters according to the settings in the
currently running project! If the currently running project does not include the unit with
the same UnitID, then the manually set parameters remain valid without any change!
User Manual relayCUE-8
www.cuesystem.com
Page 6 of 24