CUE rfCUE - Manual (Page 12)

User Manual rfCUE
www.cuesystem.com
Page 12 of 18
8. Troubleshooting
1. The Brightness of LEDs is Visibly Decreasing.
Charge the accumulator immediately.
2. When pressing the button the LEDs are going on and off immediately and then back-light
button flashes several times.
The accumulator is totally discharged. When waking up from the sleep mode it tries to light on the
LEDs. The increased consumption causes a drop of voltage, which then resets the
microprocessor. Charge the accumulator immediately.
3. The RF operating range is short.
• Check the accumulators in the rfCUE 99 and recharge them.
• Check the presence of disturbing RF signals (frequencies of other RF operating equipment in
the installation).
• Change position of the rfCUE.
• Change position of rfbaseCUE antennas.