Dual XHD7720 - Manual (Page 19)

19
XHD7720 OPERATION
Play MP3/WMA files from most mass storage devices by
connecting them to the XHD7720's USB port.
When a USB device is first connected, play will begin
automatically, and “READING” will appear momentarily in
the display. Depending on the number of files and folders,
this may take several seconds. If no valid MP3/WMA files
are detected, “NO FILE” will be displayed and the last mode
will be resumed.
Press TRACK
ll
to skip to the beginning of the next
track. Press TRACK
nn
to return to the beginning of the
current track. Pressing TRACK
nn
again skips to the
beginning of the previous track.
Press and hold TRACK
ll
or TRACK
nn
to fast
forward or reverse a track.
Press
l
/ II to temporarily stop USB playback.
Press
l
/ II again to resume playback.
Press DISP to toggle between the following song
information options:
“NO SUPPORT" will be displayed if the MP3 file contains no
ID3 tag information.
“NO ARTIST” or "NO TITLE" will be displayed if the WMA file
contains no WMA tag information.
“ROOT” will be displayed if the directory name of a root
folder is not labeled.
This icon will illuminate when the song title is displayed.
This icon will illuminate when the artist name is displayed.
This icon will illuminate when the folder name is displayed.
This icon will illuminate when the track name is displayed.
Press to select the previous folder.
Press to select the next folder.
Note: Folder access is only available on USB devices with
more than one folder.
Connecting a USB Device
(sold separately)
Playing Music
Track Select
Fast Forward and Reverse
Pause
Displaying Information
Title Icon
Artist Icon
Folder Icon
File Icon
Folder Access
USB Operation - MP3/WMA Files (Optional)
FILE NAME ELAPSED TIME TRACK NUMBER ARTIST SONG TITLE FOLDER NAME