DTS Pro Series - Manual (Page 4)

To change root directories:
1.
Start the Administrator program. A screen similar to the following will display.
Figure 1. Facility administrator initial screen
2.
From the
Setup
menu, choose
Set root directory...
Figure 2. Choose “Set root directory”
3.
In the dialog box, select the directory you created to designate
it as the Root Directory.
Figure 3. Designate the Root Directory
Manager and User Guide – DTS Pro Series Network Encoder for MAC OSX
2.3. User file management via FTP
Microsoft’s Internet Explorer web browser running on Windows has the ability to
function as a regular file manager over FTP connections. In other words, it is
possible to copy local and remote files into or out of local or remote directories,
and relocate files and directories in a remote location; all using the built-in native
capabilities of the browser. The key requirement is a constant FTP connection to
the remote location using the browser.
Keep in mind that this is a capability of the browser itself. A different browser may
not
work.
Please refer to
Uploading Packed Files
(page 25) for connection details.
2.4. Setting the Root Directory
The DTS Pro Series Network Encoder requires a disk location where the Encoder
User’s files will be stored. In the context of the DTS Pro Series Network Encoder,
this location is called its
Root Directory
. During installation, the DTS Pro Series
Network Encoder will create a default Root Directory under
/Applications/dts/Facility_Xencode/,
and call it
DTS_ROOT.
Alternatively, you,
the Manager, can create a Root Directory in your OS X user account, and later
notify the Administrator program about which existing directory to use as its
Root Directory.
Note:
You can only specify a new Root Directory if there are no users
registered in the Administrator program. If you are changing the set Root
Directory from one directory to a different one, you will need to delete all
users before the system will allow the change. Deleting a user erases all
information related to that user from the database. See topic
Deleting
Users,
page 5, for more information on deleting users.
Note:
When setting the Root Directory, avoid folders that have spaces in
their names. The FTP server cannot work with folder names containing
spaces.
Note:
Only an account for which the software was installed has direct
access to the
/Applications/dts/Facility_Xencode/
folder and its contents.
If you are specifying a Root Directory other than the default one, it is your
responsibility to set the proper access permissions accordingly.
DTS Pro Series Network Encoder for MAC OSX – Manager and User Guide
5 4
Then Click Select
Browse to select root directory