Compix NewsScroll 4.1 - Manual (Page 24)

Chapter 2 Basic Operations
Menu Options
Options Menu
The Options Menu contains all set-
tings and options information.
Create/Edit Template
Keep Checked Boxes
Auto Start Setting
APC Control Mode The Automatic Program Control (APC) Mode can be toggled on and off. This al-
lows NewsScroll to be controlled by another program via a network. The protocol
has full functionality as if the user is sitting right in front of the NewsScroll system
itself, including creating data and controlling playback.
Toggle whether or not NewsScroll will automatically run a *.nss file when
launched. The *.nss file must have been saved while the [ON] button was active.
NewsScroll typically clears all marks in the Display Check Boxes area when the
[OFF] button is clicked. Enable the [Keep Checked Boxes] feature to keep the
marks active even after clicking [OFF].
Select the [Create/Edit Template] option to open GenCG. Once in GenCG, create
a template as necessary and save. The template will automatically be updated
and ready to use within NewsScroll.
Tip
For more information on GenCG and it’s
functionalities, please see the GenCG
Manual appropriate for your version.
With [Keep Checked Boxes] unchecked, once the [OFF] button is clicked, the boxes become
deselected.
With [Keep Checked Boxes] checked, once the [OFF] button is clicked, the boxes remain se-
lected.
24
Compix Media NewsScroll Document No: 2.3.002 Revision: 2.1 Updated: 4/11/2012