Compix Analog User Manual
Page 8
Document No: 2.3.008 Revision: 1.0 Updated: 5/8/2012
Color Control Section
Adjust the incoming video’s brightness, contrast, saturation, and hue
when connected downstream of your switcher. The settings within
do not apply for Compix graphics, only incoming video. When your
Compix Input Signal is set to [Component (YPbPr)], separate set-
tings appear for your individual YPbPr contrast.
Test Frame Section with Frame Grab
If you select the [Preview] button, an expanded view of the graphical
elements appear on your video output monitor.
Test Frame: Select from an assortment of pre-created Test Patterns
with the drop down list to the right. Your can also open your own
image for testing with the [Open] button to the left. If [FadeOut] is se-
lected, adjust the Alpha (transarency) and fade the graphic in or out.