Channel Master EXTREMEtenna (4228HD) - Manual (Page 9)

7
3. Attach mounting hardware (Fig 2 and 3) to
middle of antenna grid as shown in Fig 4.
Make sure the U-bolt is placed between the
2 bracket clamps before attaching using
the 2 screws.
4. Mount antenna to mast as shown in Fig 4.
5. Connect coaxial cable to antenna cable connection
port shown in Fig 1. Secure cable to the mast with a
cable tie to prevent strain on the cable connector.
6. Point the front of the antenna toward the TV transmitter
location and adjust for best reception.
nOTe: The front of the antenna is the side with the X
shaped elements.
7. Tighten all loose hardware.
Included Hardware
Fig 2
U-bolt must be thru
bracket before
assembling to
antenna
Fig 3
Fig 4