Channel Master EXTREMEtenna (4228HD) - Manual (Page 11)

9
3. Attach the mounting hardware to the antenna as
shown in Fig 2.
Included Hardware U-bolt must be secured with
bolts thru antenna.
Fig 2
Fig 3
4. Mount antenna to mast as shown.
5. Connect coaxial cable to antenna cable connection
port. Secure cable to the mast with a cable tie to
prevent strain on the cable connector.
6. Point the front of the antenna toward the TV transmitter
location and adjust for best reception.
nOTe: The front of the antenna is the side with the X
shaped elements.
7. Tighten all loose hardware.