Maintenance, Glass cleaning, Fireplace surface clean- ing – Dimplex DF2622SS User Manual
Page 16
16
www.dimplex.com
Maintenance
of the fireplace to remove
(Figure 7).
upper bulbs are located in
6.
the upper left and upper right
corners of fireplace, behind
the light block bracket (Figure
9).
Remove the four (4) Phillips
7.
screws that attach the light
block to the firebox (Figure 9).
unscrew bulbs counter
8.
clockwise.
Insert new bulbs and screw in
9.
clockwise.
re-attach light block bracket.
10.
Lay unit on it’s back, slide
11.
front glass back into position
and attach Trim.
glass Cleaning
The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the clear door may
collect dust particles, these can
be removed by dusting lightly with
a clean dry cloth.
To remove fingerprints or other
marks, the clear door can be
cleaned with a damp cloth.
Fireplace Surface Clean-
ing
use a cloth dampened with warm
water only to clean painted sur-
faces of the electric fireplace. Do
not use abrasive cleaners.