Casella CEL CEL-360S - Manual (Page 15)

Operation Press Display Shows Comments
Press to enable,
use and to select the
following durations:
Off, 5, 10, 15, 30 minutes,
1, 2, 4, 8, 10, 12, 24 hours,
then confirm with .
5. Review
Repeat
setting Rept allows the user to select
up to 49 repeats of the timer
settings.
Press to enable,
use and to select the
number of repeats,
then confirm with .
6. Review Start/
End Times This is the First Beginning
(start) time set by dB10 or
dB12: dd.hh:mm.
The day setting is the day of
the month. When day “- -” is
indicated, measurement will
start on the current day.
Press in either the Beg
or End screen to enable/
disable each timer pair.
When a pair is disabled, its
settings will be shown as “- - -
- - -”.
7. Review Start/
End Times This is the First End (stop) time
set by dB10 (or dB12):
dd.hh:mm.
8. Review
further Start/
EndTimes
Repeat
Start/End times. The display steps through 16
sets of Start/End times.
OPTION
OPTION
OPTION
CEL-320/360 Getting Started - Page 15