Brennenstuhl Gas Detector BG 2201 - Manual (Page 15)

4.2 Locations to avoid
• Do not muffle or cover the device. This reduces
the performance of the sensor.
• Make sure that the device does not come into
contact with moisture.
• Protect the device from strong magnetic or
electrical fields as well as heavy mechanical
loads and strong vibrations.
• Sites, where the temperature drops below -10°C
or rises above 40°C.
• Do not install the gas detector in the air stream
from a fan or near doors or windows.
• Moisture-prone rooms such as bathrooms and
showers, in which the relative humidity can rise
above 95 %.
• Outside buildings, e.g. where open cases of gas
cylinders are stored.
• Enclosed areas (e.g. interior closets or areas
behind curtains), which would hinder the
device’s response in the event of a gas leak.
• Areas in which the sensor can become clogged
due to accumulation of dust or dirt.
• Immediately next to ovens, sinks or drains.
15
BG 2201 Operating Instructions
044009 Erdgas-Methangasmelder BG 2201 30.04.2010 9:35 Uhr Seite 15