BIXOLON STP-131 - Manual (Page 8)

Rev. 1.06 - 8 -
STP-131
1-2 Functions
POWER
ERROR
FEED
FEED Button
Press the FEED button once to advance paper one line.
You can also hold down the FEED button to feed paper continuously
Indicator Lights
POWER (green)
The POWER light is on whenever the printer is on.
ERROR (red)
The error LED blinks fast when paper is out.
The error LED blinks when the Near End Sensor triggered.
NOTE ※
Both Power and Error LED is blank when the Printer Cover is open.
1-3 Adjustments and Settings
The STP-131 Series is set up at the factory to be appropriate for almost all users.
It does, however, offer some settings for users with special requirements.
It has DIP switches that allow you to change communication settings, such as
handshaking and parity check, as well as print density.
This STP-131 Series also has a near-end sensor for the paper. This can give you a
warning when the paper is almost out. If you find that there is not enough paper remaining
on the roll when the paper low is triggered, the Error LED(Red) is turn on.