BIXOLON STP-131 - Manual (Page 17)

Rev. 1.06 - 17 -
STP-131
5. Self Test
The self-test checks whether the printer has any problems. If the printer does
not function properly, contact your dealer. The self-test checks the following;
5-1 Make sure paper roll has been installed properly.
5-2 Turn on the power while holding down the FEED button. The self-test begins.
5-3 The self-test prints the current printer status, which provides the control ROM Version
and the DIP switch setting.
5-4 After printing the current printer status, self-test printing will print the following,
and pause.
SELF-TEST PRINTING.
PLEASE PRESS THE FEED BUTTON.
5-5 Press the FEED button to continue printing. The printer prints a pattern using the
built-in character set.
5-6 The self-test automatically ends and cuts the paper after printing the following.
*** COMPLETED ***
5-7 The printer is ready to receive data as soon as it completes the self-test.