BIXOLON SRP-350plusII - Manual (Page 23)

Rev. 1.05 - 23 -
SRP-350/352plusIIA&C
4. Specification
Item Details
Printer
Printing Method Thermal Line Printing
Dot Density
SRP-350plusII: 180 dpi (7dots/mm)
SRP-352plusII: 203 dpi (8dots/mm)
Printing Width
3inches 72mm
2inches 48mm
Characters per line
(Default)
SRP-350plusII
: 42 (Font A) / 56 (Font B) / 56 (Font C)
SRP-352plusII
: 48 (Font A) / 64 (Font B) / 64 (Font C)
Printing Speed *1)
SRP-350plusII
: 59.1 lines/sec, 250 mm/sec
SRP-352plusII
: 61.33 lines/sec, 230 mm/sec
Receive Buffer Size 4K Bytes
SMPS Input Voltage 100~240 VAC
Frequency 50/60 Hz
SMPS Output Voltage 24 VDC
Temperature
0 ~ 45 ℃ (Operating)
-20 ~ 60 ℃ (Storage)
Humidity
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
; Except for paper
Auto Cutter 1,800,000 Cuts
Mechanism MCBF *2) 70,000,000 Lines
Paper
Paper Type Paper Roll
Roll Width
3inches 79.5±0.5mm
2inches 57.5±0.5mm
Roll Diameter Max 83mm
Paper Thickness 0.062~0.075mm
Paper Tube
Inner: Ø12mm (0.47”)
Outer: Ø18mm (0.71”)
※ NOTE
*1) Printing speed may be slower depending on the data transmission speed and the
combination of control commands.
*2) The above values are calculated under printing level 2 with recommended paper at
normal temperature. The values may vary with environment temperature, printing
level, etc.
*3) The switch is the disconnecting device. Turn off switch from any hazard.