BIXOLON SRP-330 - Manual (Page 22)

Rev. 1.05 - 22 -
SRP-330
4. Specification
Printing method
Thermal line printing
Dot density 180 dpi (7dots/mm)
Printing width 72 mm
Paper width 79.5±0.5 mm
Characters per line (default)
42 (Font A)
56 (Font B)
56 (Font C)
Printing speed 47.28lines/sec , 200 mm/sec
Receive Buffer Size 4K Bytes
※ NOTE : Printing speed may be slower, depending on the data transmission
speed and the combination of control commands.
Supply voltage
SMPS Input voltage 100~240 VAC
Frequency 50/60 Hz
SMPS Output voltage +24 VDC/2.5A
Environmental
Conditions
Temperature
0 ~ 45 ℃ (Operating)
-20 ~ 60 ℃ (Storage)
Humidity
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
; Except for paper
LIFE *
Mechanism Head 150 Km
Auto Cutter 1,500,000 Cut
MCBF * Mechanism 60,000,000 lines
* These values may vary with environment temperature, printing level, etc.