BIXOLON SLP-TX400 - Manual (Page 37)

Rev. 1.05 - 37 -
SLP-TX400x/TX403x
7. Appendix
7-1 Specifications
Item Description
Printer
Printing Method Thermal Transfer / Direct Thermal Printing
Dot Density
SLP-TX400 : 203 dpi (8 dot/mm)
SLP-TX403 : 300 dpi (11.8 dot/mm)
Printing Width
SLP-TX400 : Max. 108 mm
SLP-TX403 : Max. 105.7 mm
Printing Speed
SLP-TX400: Max. 178 mm/sec (Max. 7ips)
SLP-TX403: Max. 127 mm/sec (Max. 5ips)
Paper
Width 25 ~ 116 mm
Roll Max 130mm
Core 25.4~38.1mm (1~1.5”)
Ribbon
Length / Width Max 300m / 33 ~ 110mm(1.3~4.3
”)
Type(Outside) Wax, Wax/Resin, Resin
Core
0.5” / 1”
AC
Adapter
Input Voltage AC 100~240V
Frequency 50/60 Hz
Output Voltage DC 24V
Usage
Conditions
Temperature
5 ~ 40 ℃ (Operating)
-20 ~ 60 ℃ (Storage)
Humidity
(except for paper)
10 ~ 80 % RH (Operating)
10 ~ 90 % RH (Storage)
※ Note
- Printing speed can vary depending on the data transmission speed and combination of
control commands.
- This equipment is indooruse and all the communication hiring are limited to inside of
the building.
- The switch is the disconnecting device. Turn off switch from any hazard.
7-2 Label Types
The label types used with this printer are as follows.
• Control Labels: PP
• Other Labels: PET