DoorKing 1802 User Manual
Owner’s manual
Table of contents
Document Outline
- SECTION 1 - INSTALLATION
- 1.1.1 Surface Mount 1803 and 1810 Units
- 1.1.2 Surface Mount 1803 and 1810 Units with Recess Box
- 1.1.3 Flush Mount 1803 and 1810 Units
- 1.1.4 Flush Mount Rough-in Box (applies to 1803 and 1810 only)
- 1.1.5 Flush Mount Trim Ring (use with 1803 and 1810 units only)
- 1.1.6 Flush Mount Surface Mounting Kit (use with 1803 and 1810 units only)
- 1.1.7 1802 Surface Mount Only
- 1.1.8 1808 Surface Mount Only
- SECTION 2 – WIRING
- SECTION 3 – PROGRAMMING
- Programming from the Keypad
- Programming from an Offsite Location
- Programming Notes
- 3.1.1 Master Code
- 3.1.2 Single or Multiple Systems
- 3.1.3 Relay Strike Time
- 3.1.4 Talk Time
- 3.1.5 Tone Open Numbers
- 3.1.6 Postal Switch
- 3.1.7 Touch-tone / Rotary-dial
- 3.1.8 Number of Rings to Answer
- 3.1.9 Keypad Function
- 3.1.10 Star (*) Key Function
- 3.2.1 Programming the Directory Code Length
- 3.2.2 Programming 7-digit Phone Numbers
- 3.2.3 Programming Area Codes
- 3.2.4 Programming Phone Numbers with Area Code Reference
- 3.2.5 Deleting Individual Phone Numbers
- 3.2.6 Delete All Phone Numbers
- 3.2.7 Display / Delete Phone Numbers
- 3.2.8 Display Phone Numbers with known Directory Codes
- 3.3.1 Four-Digit Entry Code Programming
- 3.3.2 Delete Four-Digit Entry Codes
- 3.3.3 Delete All Four-Digit Entry Codes
- 3.3.4 Four-Digit Entry Code Divide Number
- 3.3.5 Five-Digit Entry Code Programming
- 3.3.6 Delete Five-Digit Entry Codes
- 3.3.7 Delete All Five-Digit Entry Codes
- 3.3.8 Five-Digit Entry Code Divide Number
- 3.4.1 Time Clock Programming
- 3.4.2 Automatic Relay Activation Time Zones
- 3.4.3 Four-Digit Entry Code Time Zone
- 3.4.4 Five-Digit Entry Code Time Zone
- 3.4.5 Flash Entry Codes
- SECTION 4 – ADJUSTMENTS
- SECTION 5 – OPERATING INSTRUCTIONS
- 5.1.1 Guest Instructions
- 5.1.2 Responding to a Guest Call
- 5.1.3 Using an Entry Code
- 5.2.1 Remote Programming
- 5.2.2 Remote Relay Activation
- 5.2.3 Relay Check
- 5.2.4 Entry Code Time Zone Enable / Disable
- 5.2.5 Auto Relay Time Zone Enable / Disable
- 5.3.1 Switch Input Operation
- 5.3.2 Talk Time
- 5.3.3 Line Sharing
- 5.3.4 Connection to a PBX
- 5.3.5 Areas with 10-digit Dialing
- SECTION 6 – MAINTENANCE