Audio Solutions TVAM2-1 - Manual (Page 11)

12
STEP 5
A ach the Wall Plate to the wall.
Wood Stud Mounting
The Wall Plate must be mounted, at the top and bo om, to at least 2 wooden studs, spaced a minimum of
16” apart. Using the correct size drill bit, pre-drill a 2.5” deep hole in each marked loca on. A ach the Wall
Plate to the wall using the included square head screws and M8 washers.
Concrete Wall Mounting
Choose a solid wall area (avoid hollow walls or the joint of the bricks) and drill a 2.5” hole using the correct
size drill bit. Insert the plas c sinker into the hole and then a ach the Wall Plate to the wall using the
included concrete bolts (Figure 6).
Figure 6 - Concrete Wall Mounting
INSTALLATION