Dell S300w User Manual
Page 44
44
Using Your Projector
S
UBNET
M
ASK
—Configure the Subnet Mask of the network connection.
G
ATEWAY
—Check the Gateway address with your network/system administrator if
you configure it manually.
DNS—Check the DNS Server IP address with your network/system administrator
if you configure it manually.
S
TORE
—Press
to save the changes made in network configuration settings.
NOTE:
1
Use
and
button to select IP Address, Subnet Mask, Gateway, DNS and
Store.
2
Press the
button to enter IP Address, Subnet Mask, Gateway or DNS to set
the value. (The selected option is highlighted in yellow)
a
Use
and
button to select the option.
b
Use
and
button to set the value.
c
After the setup is complete, press the
button to exit.
3
After the IP Address, Subnet Mask, Gateway and DNS is set up, select Store
and press the
button to store the settings.
W
IRELESS
—Default is Connect. Select Disconnect to disable the wireless
connection to use LAN networking only.
NOTE:
It is recommended to use the default settings for Wireless Connect.
R
ESET
—Press
to reset network configuration.
INFORMATION
The Information menu displays the current projector settings.