Dell S300w - Manual (Page 42)

42 Using Your Projector
L ANGUAGE —Allows you to set the language for the OSD. Press to activate the
Language menu.
P ROJECTOR M ODE —Allows you to select the projector mode, depending upon how
the projector is mounted.
• Front Projection-Desktop — This is the default option.
• Front Projection-Ceiling Mount — The projector turns the image upside
down for ceiling-mounted projection.
• Rear Projection-Desktop — The projector reverses the image so that you can
project from behind a translucent screen.
• Rear Projection-Ceiling Mount — The projector reverses and turns the image
upside down. You can project from behind a translucent screen with a ceiling-
mounted projection.
V. K EYSTONE —Manually adjust the vertical image distortion caused by tilting the
projector.
A
LERT V OLUME —Allows you to set buzzer alert loudness (Off, Low, Mid or High) for
power on/off, warning and command keys.
S TANDBY VGA O UTPUT —Select On or Off the VGA output function at projector
standby status. Default is Off.
3D DISPLAY—Select on to start the 3D display function. Default is off.