Applied Motion STM23C-3CE - Manual (Page 2)

Step 3 Configuration
If you have any questions or comments, please call Applied Motion Products Customer Support:
(800) 525-1609, or visit us online at www.applied-motion.com.
404 Westridge Dr.
Watsonville, CA 95076
Tel: 800-525-1609
Fax: 831-761 -6544
www.applied-motion.com
a) Apply power to the drive.
b) Use the ST Configurator™ to set up the motor current, limit switch-
es, encoder functionality (if applicable) and Node ID.
The c) ST Configurator™ includes a self test option (under the Drive menu) to verify
that the STM23C or STM24C and power supply are correctly wired and configured.
When configuration is complete, exit the d) ST Configurator™. The
drive will automatically switch to CANOpen Mode.
920-0043 B
STM23C/24C Quick Setup Guide
Download and install ▪ ST Configurator™ soft-
ware, available at www.applied-motion.com.
Launch the software by clicking Start/Programs/Ap- ▪
plied Motion Products/ST Configurator
If you have any questions or comments, please call Applied Motion Products ▪
Customer Support 800-525-1609 or visit us online www.applied-motion.com.
Step 2 - ST Configurator