ABtUS AV418 - Manual (Page 4)

User Operation Guide
Step - 1 - insert Cross pole (item-7) into Lower pole assembly (item-4). Secure with
2x M10x60 socket cap screw and hexagon nuts (“M” in item-10).
Step - 2a - fi x Linkage bar (item-9) as shown with Spacer-I and Spacer-II (“G” in item-10). Secure with
M8x15/washer (“I” in item-10) and M8x25/nut (“J” in item-10)socket
cap screws.
Step - 2b -fi x Right side plate (item-6) at end of Cross pole (item-8) with Clamp plate and secure with
3x M8X15 socket cap screws.
Step - 2c - fi x 2x Angle bars (item-5) at top and bottom of Right side plate. Secure with M8x15 socket
cap screws (“H” in item-10).
INSTALLATION GUIDE
Cross pole
Lower pole assm
insert
Right side plate Angle bar
Clamp plate
Spacer-
I
Spacer- I I Linkage bar