Denon AVR-590 User Manual

Page 25

ENGLISH

Get
ting Star

ted

Connections

Pla
ybac

k
Remot

e Contr

Inf
or

mation

oubleshooting

Specifications

Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup)

• If the result differs from the actual connection status or an error mes-

sage appears, use

to on-screen display “Retry” and then press

to repeat the measurement.

• If the result still differs from the actual connection status after re-

measurement or the error message still appears, it is possible that
the speakers are not connected properly. Turn the AVR-590 off, check
the speaker connections and repeat the measurement process from
the beginning.

• For instance, If the location or direction of a speaker is altered, the

Audyssey Auto Setup should be performed again to ensure the cor-
rect EQ solution for the new room configuration.

NOTE

Do not change the speaker connections or subwoofer volume, or
speaker locations after making measurements. If changes are neces-
sary, make the changes and use the Audyssey Auto Setup once again
for an updated EQ solution.

Press

This returns you to analysis results items,

so repeat step 7.

Press

to select “Next”, then

press

Press

to select “Store”, then press

“Storing Please wait...”
is displayed on the on-
screen display while the
results are being stored.
When storing is complete,
“Storing complete. Auto
Setup is now finished.”
is displayed on the on-
screen display.

If you do not want to save

the measurement results,
use

to select “Cancel”,

then select “Yes” using

. All the measured

Audyssey Auto Setup data
will be erased.

NOTE

Do not turn the power off while the settings are being stored.

Disconnect the setup microphone from the AVR-

590.

Step5:Store

MultEQ

Store

Cancel

[ENT]:Store

Please select “Store”

to store measurement

values.

⇩

Step5:Store

MultEQ

Storing

Please wait...

Set
tings