MIPRO ma101act(2ce132) - Manual (Page 7)

3. How To Charge Batteries In the Microphones:
1. Connect the charger to AC power supply.
2. Following the indication of batteries polarity shows on the rear of the
microphone and insert the microphone into the charger to start
charging. Please see illustration below.
- 11 - - 12 -
(a) Flashing indicator: The microphone is under quick-charging
mode.
(b) Green Indicator: The microphone is fully charged. Charging time
is approximately 2 hours then charger continues to charge with
low current.
(c) No Indicator: No microphone is inserted for charging.
3. Status of Indicator:
(a) Please use designated power adapter to avoid insufficient
voltage or current. However, if the input power is too high,
serious damage to the charger, rechargeable batteries or even
the microphone will occur. Designated DC adaptor provides 12
Volt / 500 mA.
(b) Please make sure the microphone is power-off before charging.
(c) To minimize possible risks and dangers, please DO NOT use
unauthorized charger to charge MIPRO microphone.
4. Special Notes for Charging
Charging indicator