Specifications, 17 specifications – Denon AVR-983 User Manual
Page 75
75
17 SPECIFICATIONS
2
Audio section
• Power amplifier
Rated output:
Front:
90 W + 90 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
125 W + 125 W (6
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Center:
90 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
125 W
(6
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Surround:
90 W + 90 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
125 W + 125 W (6
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Surround Back: 90 W + 90 W
(8
Ω
/ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.)
125 W + 125 W (6
Ω
/ohms, 1 kHz with 0.7% T.H.D.)
Dynamic power:
120 W x 2 ch
(8
Ω
/ohms)
170 W x 2 ch
(4
Ω
/ohms)
200 W x 2 ch
(2
Ω
/ohms)
Output terminals:
Front:
A or B
6 ~ 16
Ω
/ohms
A + B
8 ~ 16
Ω
/ohms
Center, Surround, Surr. Back/Zone 2:
6 ~ 16
Ω
/ohms
• Analog
Input sensitivity / input impedance:
200 mV / 47 k
Ω
/kohms
Frequency response:
10 Hz ~ 100 kHz: +0, –3 dB (DIRECT mode)
S/N:
102 dB (DIRECT mode)
Distortion:
0.005% (20 Hz ~ 20 kHz) (DIRECT mode)
Rated output:
1.2 V
• Digital
D/A output:
Rated output — 2 V (at 0 dB playback)
Total harmonic distortion — 0.008% (1 kHz, at 0 dB)
S/N ratio — 102 dB
Dynamic range — 96 dB
Digital input:
Format — Digital audio interface
• Phono equalizer (PHONO input — REC OUT)
Input sensitivity:
2.5 mV
RIAA deviation:
±1 dB (20 Hz to 20 kHz)
Signal-to-noise ratio:
74 dB (A weighting, with 5 mV input)
Rated output / Maximum output:
150 mV / 8 V
Distortion factor:
0.03% (1 kHz, 3 V)
2
Video section
• Standard video jacks
Input / output level and impedance:
1 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB
• S-video jacks
Input / output level and impedance:
Y signal — 1 Vp-p, 75
Ω
/ohms
C signal — 0.286 Vp-p, 75
Ω
/ohms
Frequency response:
5 Hz ~ 10 MHz — +0, –3 dB
• Color component video jacks
Input / output level and impedance:
Y signal — 1 Vp-p, 75
Ω
/ohms
P
B
/C
B
signal — 0.7 Vp-p, 75
Ω
/ohms
P
R
/C
R
signal — 0.7Vp-p, 75
Ω
/ohms
Frequency response:
DC ~ 100 MHz — +0, –3 dB
2
Tuner section
[FM] (note: µV at 75
Ω
/ohms, 0 dBf=1 x 10
–15
W)
[AM]
Receiving Range:
87.50 MHz ~ 107.90 MHz
520 kHz ~ 1710 kHz
Usable Sensitivity:
1.0 µV (11.2 dBf)
18 µV
50 dB Quieting Sensitivity:
MONO
1.6 µV (15.3 dBf)
STEREO
23 µV (38.5 dBf)
S/N (IHF-A):
MONO
77 dB
STEREO
72 dB
Total Harmonic Distortion (at 1 kHz):
MONO
0.15%
STEREO
0.3%
2
General
Power supply:
AC 120 V, 60 Hz
Power consumption:
5.5 A
1 W Max (Standby)
Maximum external dimensions:
434 (W) x 171 (H) x 416 (D) mm (17-3/32” x 6-47/64” x 16-3/8”)
Mass:
13.0 kg (28 lbs 11 oz)
2
Remote control unit (RC-924)
Batteries:
R6P/AA Type (three batteries)
External dimensions:
58 (W) x 230 (H) x 37 (D) mm (2-9/32” x 9-1/16” x 1-29/64”)
Mass:
230 g (Approx. 8 oz) (including batteries)
*
For purposes of improvement, specifications and design are subject to change without notice.