beautypg.com

Listening to the radio – Denon AVR-983 User Manual

Page 61

background image

61

12 LISTENING TO THE RADIO

If tuning does not stop at the desired station, use to the “Manual
tuning” operation.

1

Set the input function to “TUNER”.

FUNCTION

2

Watching the display, press the
BAND button to select the desired
band (AM or FM).

3

Press the MODE button to set the
auto tuning mode.

4

Press the TUNING + (up) or –
(down) button.

Auto tuning

“Auto” appears on the display.

Automatic searching begins, then
stops when a station is tuned in.

(Main unit)

(Remote control unit)

Manual tuning

1

Set the input function to “TUNER”.

1

1

2

4

3

(Remote control unit)

(Remote control unit)

(Remote control unit)

• Check that the remote control unit is set to AMP mode (TAPE, CDR/MD or CD).

FUNCTION

2

Watching the display, press the
BAND button to select the desired
band (AM or FM).

3

Press the MODE button to set the
manual tuning mode.
Check that the display’s “AUTO”
indicator turns off.

(Main unit)

(Remote control unit)

(Remote control unit)

(Remote control unit)

4

Press the TUNING + (up) or – (down)
button to tune in the desired station.
The frequency changes continuously
when the button is held in.

(Remote control unit)

NOTES:
• When in the auto tuning mode on the FM band, the “STEREO”

indicator lights on the display when a stereo broadcast is tuned in.
At open frequencies, the noise is muted and the “TUNED” and
“STEREO” indicators turn off.

• When the manual tuning mode is set, FM stereo broadcasts are

received in monaural and the “STEREO” indicator turns off.