Remote control web server, Introduction, Installing the software – Optoma HQView320 User Manual
Page 26: Discovery tool
©
Calibre UK Limited Issue 2.40 22
nd
April 2013
22
REMOTE CONTROL WEB SERVER
4.1.
Introduction
HQView-3xx features a web server which connects to a PC web browser via TCP/IP. The menu system
of HQView-3xx is mirrored into the web browser and all menu items can be accessed and controlled
through the keyboard or mouse of the PC.
Note: Backup/Restore is only available for V2 hardware.
4.2.
Installing the Software
No extra software needs to be installed on a PC. The PC web browser is used as the graphical user
interface for all control items. To connect to the HQView-3xx the TCP/IP address of the unit has to be
entered into the address list box of the web browser in the following form
The
TCP/IP address assigned to HQView-3xx can be found in the System/Network Settings menu.
4.3.
Discovery Tool
Calibre provides a DiscoveryTool.exe Windows application to identify Calibre boxes in the network.
Clicking on the link of the recognized box will open a browser and make a connection to the
corresponding box. The box identifier is made up of
“PV6S” in the case of HQView-3xx followed by the 6
least significant digits of the MAC address. The MAC address of the box can be found in the
System/Network Settings menu.
Note: This is for use on a network not on a single wire connection.