User controls, Lan settings – Optoma X307USTi User Manual
Page 37
37
English
User Controls
LAN Settings
DHCP: If a DHCP server exists in the network to which the
`
`
projector is connected, the IP address will automatically be
acquired when you select DHCP On. If DHCP is Off, manually
set the IP Address, Subnet Mask, and Gateway. Use ▲ or ▼ to
select the number of IP address, Subnet Mask, and Gateway.
IP Address: Select an IP address.
`
`
Subnet Mask: Configure the Subnet Mask of the LAN
`
`
connection.
Gateway: Check the Gateway address with your network/
`
`
system administrator if you configure it manually.
DNS: Check the DNS Server IP address with your network/
`
`
system administrator if you configure it manually.
Store: Choose “Yes” to save the changes made in network
`
`
configuration settings.
Reset: Choose “Yes” to return the display parameters on all
`
`
menus to the factory default settings.
LAN
LAN
DHCP
IP Address
Subnet Mask
Gateway
DNS
Store
Reset
Select
Enter
Exit
Off
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0