Optoma X307USTi - Manual (Page 14)

14
English
Installation
Powering On/Off the Projector
Powering On the Projector
Securely connect the power cord and signal cable. When 1.
connected, the Power LED will turn red.
Turn on the lamp by pressing
2. “ ” button on the control
panel or on the remote control. The Power LED will turn blue.
Turn on your source that you want to display on the screen
3.
(computer, notebook, video player, etc). The projector will de-
tect the source automatically and will display on the screen.
If you connected multiple sources at the same time, press
4.
the “Source” button on the remote control to switch between
inputs.
MENU
POWER TEMP LAMP
RESYNC SOURCE
or