Optoma W350 - Manual (Page 42)

42
English
User Controls
SETUP | Security
Security
 On: Choose “On” to use security verification when turning on
the projector.
 Off: Choose “Off” to be able to switch on the projector without
password verification.
Security Timer
Use this function to set how long (Month/Day/Hour) the projector
can be used. Once this time has elapsed you will be requested to
enter your password again.
Change Password
 First time:
1. Press “ ” to set the password.
2. The password has to be 4 digits.
3. Use number button on the remote to enter your new
password and then press “Enter” key to confirm your
password.
 Change Password:
1. Press “ ” to input old password.
2. Use number button to enter current password and then
press “Enter” to confirm.
3. Enter new password (4 digits in length) using the number
buttons on the remote, then press “Enter” to confirm.
4. Enter new password again and press “Enter” to confirm.
 Password default
value is “1234” (first
time).
 “Security” depends
on model’s specifi-
cations.