NISSAN 2009 Murano - Manual (Page 307)

Black plate (305,1)
Model "Z51-D" EDITED: 2007/ 10/ 2
SAA1935
4. The system confirms the recognized com-
mand, and a list of command list categories
appears.
5. Locate your desired voice command in the
list using the multi-function controller. Se-
lecting a category lists its voice commands.
6. Push the TALK switch and enter the
command.
Operating tips
. Voice commands cannot be accepted when
the icon is .
. The list displayed can be scrolled by tilting
the ENTER switch on the steering wheel.
. If the command is not recognized, the
system announces, “Please say again”.
Repeat the command in a clear voice.
. Push the BACK button once to return to the
previous screen.
. If you want to cancel the command, push
and hold the TALK switch for 1 second.
The message “Voice canceled” will be
announced.
. Push the TALK switch again to pause
the operation. Push the TALK switch to
restart the operation.
. If you want to adjust the volume of the
system feedback, push the volume control
buttons (+ or
−) on the steering wheel or
use the audio system volume knob while the
system is making an announcement.
How to speak numbers
NISSAN Voice Recognition requires a certain
way to speak numbers in voice commands.
Refer to the following examples. (General rule:
Either “zero” or “oh” can be used for “0”).
Radio frequencies:
Speak radio frequencies according to the
following examples:
. 930 kHz
— “Tune nine thirty AM.”
— “Tune nine thirty.”
. 1000 kHz
— “Ten hundred.”
. 1040 kHz
— “Tune ten forty.”
. 1710 kHz
— “Tune seventeen ten.”
. 97.9 MHz
— “Tune ninety seven point nine.”
. 100.5 MHz
— “Tune one hundred point five.”
. 101.1 MHz
— “Tune one oh one point one FM.”
Temperatures (climate control):
Speak temperatures according to the following
examples:
. 748F
— “Temperature seventy four.”
. 21.58C
— “Temperature twenty one point five.”
Monitor, heater, air conditioner, audio, phone and voice recognition systems 4-143