Dixon SPEEDZTR 44 - Manual (Page 19)

CONTROLS
DIXON -19
Seat Adjustment Lever
The seat can be adjusted lengthways. When making
adjustments, sit on the seat. Slide the lever to the side
and maneuver seat to appropriate placement and
release lever.
IMPORTANT INFORMATION
Before pushing or towing tractor,
transmission must be unlocked and park
brake released. The tractor should never
be pulled at more than 2 miles per hour (3.2
km/h) or for distances over ¼ mile (.402 km).
Trailer the unit for distances over ¼ mile.
8050-165
Seat adjustment
Bypass Linkage
Unlocking Transmission
When pushing or pulling the mower, be sure to engage
the bypass linkages.
Always turn off engine before engaging or 1.
disengaging the hydro release (free wheel)
lever. Never attempt to move the lever with the
engine running.
Lift the seat to access release levers. Push
2.
the hydro release levers toward the rear of the
machine and inward until notches lock in place
on frame. Release park brake.
To engage the transmissions, move the
3.
release levers outward so they return to normal
position.
8050-811
Bypass linkages
Push lever in
and lock notch
on frame
(2 places)