Blade switch, Circuit breaker, Parking brake – Dixon SPEEDZTR 44 User Manual
Page 22: Controls
CONTROLS
22-
DIXON
Blade Switch
In order to engage the mower deck, pull the knob out;
the mower blades are disengaged when the knob is
depressed.
IMPORTANT INFORMATION
The machine must stand absolutely still when
applying the parking brake. Always set the
parking brake before dismounting. Release
the parking brake before moving the mower.
8050-816
Blade switch
8050-816
Circuit breaker
Circuit Breaker
The circuit breaker provides protection for the electrical
system by (1) 15 amp circuit breaker. If the circuit
breaker trips, push the button to reset. If the condition
repeats, consult a dealer for inspection and repair.
Parking Brake
The parking brake is found on the operator’s left. Pull
the lever upward to activate the brake and downward
to release it.
The park brake is designed to hold the mower from
moving and is not intended for use in stopping the
mower while it is in motion. The engine will stop if the
park brake is engaged while the control levers are in
the drive position.
8050-823
Engaged parking brake